Register Now

EUBCE 2023 - BIOMASS CONVERSION FOR BIOENERGY

BIOMASS CONVERSION FOR BIOENERGY

 Print

Piloting of novel gasification-to-power pathways and supporting research

Session Description

The session covers both the piloting of complete gasification-based biomass feedstock - to - power pathways (dual fluidized-bed gasification, SOFC and torrefaction, entrained-flow gasification, gas engine) and supporting research concerning two major aspects, viz. tar/soot formation and hot gas filtration.

Chair & Moderator

Moderator portrait

Francesco PATUZZI

Free University of Bolzano, Faculty of Engineering, ITALY

Moderator portrait

Joakim LUNDGREN

Lulea University of Technology, SWEDEN

Presenters

Recent developments in dual FB-gasification and fuel characteristics

Session Description

This session focusses on the advances in dual-fluidized bed gasification and chemical looping gasification as well as the insight in the use of new feedstocks in gasification for synthesis gas production.

Chair & Moderator

Moderator portrait

Frederik RONSSE

Ghent University, Green Chemistry and Technology Dpt., BELGIUM

Moderator portrait

Sebastian SANCHEZ VILLASCLARAS

University of Jaen, Chemical Engineering, Environmental and Materials Dpt., SPAIN

Presenters

Recent developments in gasification for synthesis gas production

Session Description

This session focusses on the advances in gasification as well as the insight in the use of new feedstocks in gasification for synthesis gas production.

Chair & Moderator

Moderator portrait

Giacomo TALLURI

Renewable Energy Consortium for Research and Development, ITALY

Moderator portrait

Thomas BRUNNER

BIOS Bioenergiesysteme, AUSTRIA

Presenters

Presenter portrait

Sanna TUOMI

VTT Technical Research Centre of Finland, Thermochemical Conversions Dpt., FINLAND

Session reference: 4AO.8.1

Co-production of Synthesis Gas and Biochar Via Fluidised-Bed Gasificationo of Biomass Residues - Effect of Gasification on Biochar Characteristics
Presenter portrait

Jirat MANKASEM

Newcastle University, School of Engineering, UNITED KINGDOM

Session reference: 4AO.8.2

Wood Pellets Two-stage Gasification using CO2-steam to Produce Hydrogen-rich Syngas
Presenter portrait

Avishek GOEL

Tampere University, Material Science and Energy Engineering, FINLAND

Session reference: 4AO.8.3

Evaluation of Multiple Oxygen Carriers for High-quality Syngas Production Using Biomass Chemical Looping Gasification

Recent developments in dual FB-gasification and fuel characteristics

Session Description

This session focusses on the advances in dual-fluidized bed gasification and chemical looping gasification as well as the insight in the use of new feedstocks in gasification for synthesis gas production.

Chair & Moderator

Moderator portrait

Frederik RONSSE

Ghent University, Green Chemistry and Technology Dpt., BELGIUM

Moderator portrait

Serge BIOLLAZ

Paul Scherrer Institut, Thermal Processes & Combustion Dpt., SWITZERLAND

Presenters

Presenter portrait

Francesco PATUZZI

Free University of Bolzano, Faculty of Engineering, ITALY

Session reference: 4BV.1.2

Small-scale Producer Gas Upgrading for Bio-hydrogen Production
Presenter portrait

Wasif FAROOQ

King Fahd University of Petroleum and Minerals, Chemical Engineering Dpt., SAUDI ARABIA

Session reference: 4BV.1.7

Design and Simulation of Extracted and a Non-Extracted Blend Of MicroalgaeaAnd Spent Coffee Biomass for Syngas Production
Presenter portrait

Mayra Alejandra SUAREZ

University of the Basque Country, Chemical Engineering Dpt., SPAIN

Session reference: 4BV.1.13

Effect of Metal Addition to Primary Catalyst in the Biomass Steam Gasification in a Fountain Confined
Presenter portrait

Fahim FAYAZ

Tampere University, Materials Science and Environmental Engineering Dpt., FINLAND

Session reference: 4BV.1.15

Oxidative Ethanol Dry Reforming over Co/Al2O3 Catalyst for Syngas Production
Presenter portrait

Sang Jun YOON

Korea Institute of Energy Research, Clean Fuel Department, REPUBLIC OF KOREA

Session reference: 4BV.1.16

Steam Reforming of Biomass Gasification Tar Over Ni-Lanthanides Catalysts
Presenter portrait

Marlon RITZ

Chair of Energy Systems, Technical University of Munich, GERMANY

Session reference: 4BV.1.17

Investigation of the Release Behavior of Heavy Metals during Gasification of Contaminated Biomass
Presenter portrait

Alexander BARTIK

TU Wien, Institute of Chemical, Environmental and Bioscience Engineering Dpt., AUSTRIA

Session reference: 4BV.1.18

Experimental Investigation and Techno-Economic Analysis of Synthetic Natural Gas Production from Woody Biomass
Presenter portrait

Sebastian SANCHEZ VILLASCLARAS

University of Jaen, Chemical Engineering, Environmental and Materials Dpt., SPAIN

Session reference: 4BV.1.22

Start-Up Procedure for a Downdraft Biomass Gasifier Using Olive Stones

Gasification-to-power research and development progress

Session Description

In addition to integral gasification-based systems development, various aspects will be addressed including tar measurement, char application, control aspects, gasifier and system modelling.

Chair & Moderator

Moderator portrait

Jaap KIEL

TNO, Biomass & Circular Technologies, THE NETHERLANDS

Moderator portrait

Francesco PATUZZI

Free University of Bolzano, Faculty of Engineering, ITALY

Presenters

Presenter portrait

Muhammad Zubair QURESHI

Free University of Bozen-Bolzano, Mechanical Engineering Dpt., ITALY

Session reference: 4BV.5.1

Wood Packaging Waste Valorisation: Design of a Producer Gas Combustion Test-rig for Fundamental Flame Studies
Presenter portrait

Muhammad Zubair QURESHI

Free University of Bozen-Bolzano, Mechanical Engineering Dpt., ITALY

Session reference: 4BV.5.2

Wood Packaging Waste Valorisation: Numerical Investigation of Laminar Producer Gas Flame
Presenter portrait

Marco BARATIERI

Free University of Bolzano, Faculty of Science and Technology, ITALY

Session reference: 4BV.5.3

Gasification of Wood Packaging Waste: A Polygenerative Approach
Presenter portrait

Filippo OTTANI

University of Modena and Reggio Emilia, Dept. of Engineering Enzo Ferrari, ITALY

Session reference: 4BV.5.6

Preliminary Study of a Gravimetric Approach to the Solid Phase Absorption Methodology for Tars Sampling in Biomass Gasification Process
Presenter portrait

Filippo OTTANI

University of Modena and Reggio Emilia, Dept. of Engineering Enzo Ferrari, ITALY

Session reference: 4BV.5.8

Utilization of Gasification Biochar for the Reduction of Greenhouse Gases and Ammonia Emissions in Swine Slurry Storages
Presenter portrait

Marco BARATIERI

Free University of Bolzano, Faculty of Science and Technology, ITALY

Session reference: 4BV.5.9

Novel Gasification Char Based Adsorbents for the Removal of Pharmaceuticals from Water
Presenter portrait

Onu AJAH

African Center of Excellence for Sustainable Power and Energy Development, University of Nigeria, Laboratory of Industrial Electronics, Power Devices and New Energy Systems, NIGERIA

Session reference: 4BV.5.10

Optimal Temperature Control of Gasification Plant for Power Generation Using Sliding Mode Control Technique
Presenter portrait

Francesco PATUZZI

Free University of Bolzano, Faculty of Engineering, ITALY

Session reference: 4BV.5.11

Modeling Performance of a Pilot-scale Gasification System for CHP Applications using Neural Networks
Presenter portrait

Xinyi WEI

EPFL, Energy, SWITZERLAND

Session reference: 4BV.5.13

Environment Analysis of Fuel to Power Routes
Presenter portrait

Jihong MOON

Korea Institute of Energy Research, Clean Fuel Research Laboratory, REPUBLIC OF KOREA

Session reference: 4BV.5.18

Operating Characteristics of 8 MWth Bubbling Fluidized Bed Gasification using unused biomass

Novel methods for emission reduction and ash utilisation

Session Description

Novel approaches regarding NOx and aerosol emission reduction as well as for carbon capture and ash utilisation will be presented.

Chair & Moderator

Moderator portrait

Marco BARATIERI

Free University of Bolzano, Faculty of Science and Technology, ITALY

Moderator portrait

Nicolai David JABLONOWSKI

Forschungszentrum Jülich, IBG-2: Plant Sciences, GERMANY

Presenters

Presenter portrait

Alex SEBASTIANI

University College London, Chemical Engineering Dpt., UNITED KINGDOM

Session reference: 4CO.3.2

Decarbonising Energy-from-Waste in the UK: A Techno-economic and Environmental Assessment of Capturing Carbon Emissions
Presenter portrait

Hendrik MÖRTENKÖTTER

Technische Universität München, Chair of Energy Systems, GERMANY

Session reference: 4CO.3.3

Alkali Removal by Mineral Sorbents in a Novel Two-staged Thermogravimetric Analysis System
Presenter portrait

Thomas ZENG

DBFZ Deutsches Biomasseforschungszentrum gemeinnützige, Thermo-chemical Conversion Dpt., GERMANY

Session reference: 4CO.3.4

Potential Use of Bottom Ashes from Non-woody Biomass Combustion as Sustainable Supplementary Cementitious Materials

Biomass conversion to bioenergy

Session Description

This plenary sessions covers some of the latest developments of technologies for the conversion of biomass and includes small-scale biomass combustion bolilers, fluidised bed gasification development from pilot to demonstration scale and the prospects for vastly expanding biogas production in Europe.

Chair & Moderator

Moderator portrait

Christian THIEL

European Commission, Joint Research Centre, Directorate for Energy, Transport and Climate, Head of Unit, ITALY

Moderator portrait

Dina BACOVSKY

BEST - Bioenergy and Sustainable Technologies, Sustainable Supply and Value Cycles, AUSTRIA

Presenters

Presenter portrait

David KADLEZ

TU Wien, Institute of Chemical, Environmental and Bioscience Engineering, AUSTRIA

Session reference: CP.1.2

Technology Development of Advanced Dual Fluidized Bed Steam Gasification from Pilot to Demonstration Scale
Presenter portrait

Jens Bo HOLM-NIELSEN

Aalborg University, Energy Dpt., DENMARK

Session reference: CP.1.3

Five Times Larger Biogas Production in Europe 2030 How?

New approaches regarding combustion technology, emission reduction and new fuels

Session Description

Characterisation and utilisation of new fuels, emissions measurement, new small-scale combustion systems as well as new approaches towards emission reduction will be presented.

Chair & Moderator

Moderator portrait

Marco BARATIERI

Free University of Bolzano, Faculty of Science and Technology, ITALY

Moderator portrait

Thomas BRUNNER

BIOS Bioenergiesysteme, AUSTRIA

Presenters

Presenter portrait

Thomas ZENG

DBFZ Deutsches Biomasseforschungszentrum gemeinnützige, Thermo-chemical Conversion Dpt., GERMANY

Session reference: 4CV.3.1

Evaluation of the Emission and Ash Behavior of a Small-scale Fluidized Bed Combustion System for the Utilization of Non-woody Solid Biofuels
Presenter portrait

Gregory DAVIS

Kettering University, Mechanical Engineering Dpt., USA

Session reference: 4CV.3.8

Reducing Emissions from Small Carbureted Engines when Using a Drop-in High-Blend Ethanol Fuel
Presenter portrait

Suani COELHO

Júlio Romano Meneghini Processo FAPESP 2020/15230-5, University of São Paulo, BRAZIL

Session reference: 4CV.3.12

CO2 Capture Technical Potential in the Sugar and Ethanol Sector in the São Paulo State
Presenter portrait

Andreas HUFT

Fraunhofer Institute for Environmental, Safety, and Energy Technology UMSICHT, Process Engineering Dpt., GERMANY

Session reference: 4CV.3.13

Utilization of Foliage - Closed Loop Recycling and Energetic Potential on Municipal Level
Presenter portrait

Thorben DE RIESE

Technical University of Munich, Chair of Energy Systems, GERMANY

Session reference: 4CV.3.15

Towards a Model for the Prediction of Aerosol Mitigation in Power Plants Using Solid Additives
Presenter portrait

Edson BAZZO

Federal University of Santa Catarina, Department of Mechanical Engineering,, BRAZIL

Session reference: 4CV.3.16

Modeling of Porous Media in a Reciprocating Grate Furnace of a 3MW Boiler Burning Eucalyptus Chips

Innovative combustion concepts and novel modelling approaches

Session Description

New combustion technologies as well as novel modelling approaches are described for combustion systems using gaseous, liquid and solid biomass fuels, and will include a novel looping technology to achieve negative emissions.

Chair & Moderator

Moderator portrait

Ingwald OBERNBERGER

BIOS Bioenergiesysteme, AUSTRIA

Moderator portrait

Thomas ZENG

DBFZ Deutsches Biomasseforschungszentrum gemeinnützige, Thermo-chemical Conversion Dpt., GERMANY

Presenters

Presenter portrait

Johannes HAIMERL

Chair of Energy Systems, Technical University of Munich, GERMANY

Session reference: 4CO.9.1

Modelling and Analysis of NOx Formation Paths for Pulverized Biomass Combustion
Presenter portrait

Martin HAAF

Sumitomo SHI FW, R&D and Patents Dpt., FINLAND

Session reference: 4CO.9.2

Calcium Looping using CFB Technology to Achieve Negative Emissions in Biomass-fired Power Plants
Presenter portrait

Invited

Session reference: 4CO.9.4

Biogas research and innovation (I)

Session Description

This poster session contains a variety of reports from projects, including gas cleaning, nutrient removal, ex-situ biomethanation, plant maintenance and the impact on methane losses, mixed feedstock for enhancing methane production and the performance of various feedstocks in the AD process.

Chair & Moderator

Moderator portrait

Jens Bo HOLM-NIELSEN

Aalborg University, Energy Dpt., DENMARK

Moderator portrait

Dominik RUTZ

WIP Renewable Energies, Bioenergy & Bioeconomy Unit, GERMANY

Presenters

Presenter portrait

Vanja JURISIC

University of Zagreb Faculty of Agriculture, Agricultural Technology, Storing and Transport Dpt., CROATIA

Session reference: 4CV.5.5

A Comparative Analyses of Biogas/biomethane Potential And Biodegradability of Corn Silage And Arundo Donax L. in the Mesophilic Continuous Anaerobic Digestion Systems
Presenter portrait

Ana MATIN

University of Zagreb Faculty of Agriculture, Agricultural Technology, Storing and Transport Dpt., CROATIA

Session reference: 4CV.5.7

The Possibility of Using Panicum Virgatum as Raw Material for Biogas Production Considering the Harvest Time
Presenter portrait

Bernhard HUBER

TU München, Regenerative Energiesysteme Dpt., GERMANY

Session reference: 4CV.5.11

Positioning Proposals for Sensors which Monitor Agitation Efficiency and Mixing Quality in Biogas Fermenters
Presenter portrait

Matteo FRANCAVILLA

University of Foggia, Agriculture, Food and Environmental Science Dpt., ITALY

Session reference: 4CV.5.14

Efficient Biogas Desulfurization by Means Carbonaceous Materials Derived from Biowastes
Presenter portrait

Rashmi IRA

Indian Institute Of Technology Mandi, School of Biosciences and Bioengineering, INDIA

Session reference: 4CV.5.16

Designing Synthetic Microbial Consortia for Biohythane Production Using "Cow Dung" As A Substrate and Evaluating Microbial Dynamics by Metagenomic Profiling
Presenter portrait

Radziah WAHID

Antec Biogas, Research and Development Dpt., NORWAY

Session reference: 4CV.5.17

Increasing the Hydrolysis of Fish Wastes by a Biological Pre-Treatment Approach
Presenter portrait

Josef HOFFMANN

University of Applied Sciences Landshut, Faculty of Mechanical Engineering, GERMANY

Session reference: 4CV.5.18

A Novel Type of Small-Scale Biogas Plants with Textiles
Presenter portrait

Josef HOFMANN

University of Applied Sciences Landshut, Faculty of Mechanical Engineering, GERMANY

Session reference: 4CV.5.19

Biogas Potential on the Island of Tenerife with the Biodegradable fraction from Hotels` Waste

Suitability of various feedstock as solid biofuels

Session Description

This oral session looks at the potential use of mainly residues from other processes, and from contaminated land, as additional biomass feedstock and fuel for combustion.

Chair & Moderator

Moderator portrait

Thomas SCHLEKER

European Commission, DG RTD, BELGIUM

Moderator portrait

Capucine DUPONT

The Delft Institute for Water Education, THE NETHERLANDS

Presenters

Development of pretreatments, especially torrefaction, via process combination, pilot scale experiments and kinetic modelling

Session Description

This oral session looks at the pretreatment of biomass by steam explosion and by torrefaction, with torrefaction considered on its own or as a treatment step before pyrolysis.

Chair & Moderator

Moderator portrait

Gururaja Rao SRIDHAR

Sardar Swaran Singh National Institute of Bioenergy, INDIA

Moderator portrait

Fabian STENZEL

Fraunhofer-Institut UMSICHT, Business Development, GERMANY

Presenters

Presenter portrait

Abhishek SINGHAL

Tampere University, Material Science and Environmental Engineering, FINLAND

Session reference: 4CO.15.2

Combined Leaching and Steam Explosion Pretreatment for Improving Fuel Quality of Biomass
Presenter portrait

Ji-ho YOO

Korea Institute of Energy Research, Fine dust research Lab., REPUBLIC OF KOREA

Session reference: 4CO.15.3

Continuous Biomass Torrefaction/pyrolysis using a Pilot Scale (1 tpd) Flexible Counter Flow Multi-baffle (F-COMB) Reactor
Presenter portrait

Heeyoon KIM

Sungkyunkwan University, School of Mechanical Engineering, REPUBLIC OF KOREA

Session reference: 4CO.15.4

Prediction Model for Pyrolysis Kinetics of Torrefied Biomass Based on Raw Biomass Properties and Torrefaction Severity

Biogas research and innovation (II)

Session Description

This is the second biogas poster session and contains reports from projects, including biomass from contaminated land, feedstock pretreatment, effectiveness of inoculants, methane potentials of crop residues, biowastes for AD, and biogas process diagnostics, process mathematical modelling, and other topics.

Chair & Moderator

Moderator portrait

Ioana IONEL

Politehnica University of Timisoara, Mechanical Engineering Dpt., ROMANIA

Moderator portrait

Bernhard DROSG

BEST - Bioenergy and Sustainable Technologies, AUSTRIA

Presenters

Presenter portrait

Alessandra PICCITTO

University of Catania-Dip. Di3A, Unict-di3a, ITALY

Session reference: 4CV.10.3

Biomethane Production From Giant Reed Biomass Cultivated In Heavy Metal Contaminated Soils
Presenter portrait

Alessandra PICCITTO

University of Catania-Dip. Di3A, Unict-di3a, ITALY

Session reference: 4CV.10.4

Biomethane Production from Giant Reed Biomass Under Different Harvest Times and Fungal Pretreatment
Presenter portrait

Ayush AGARWAL

Paul Scherrer Institute & École Polytechnique Fédérale de Lausanne, SWITZERLAND

Session reference: 4CV.10.5

Biogas Diagnostics: Quantifying Siloxanes and Sulfur Compounds for Improving Energy Use of Biomass
Presenter portrait

Alessandro NERI

Università degli Studi Mediterranea di Reggio Calabria, Agriculture Dpt., ITALY

Session reference: 4CV.10.6

Recovery of Agrifood By-products and Food Waste for Biomethane Production
Presenter portrait

Elena FRANCHITTI

University of Torino, Public Health and Pediatrics Dpt., ITALY

Session reference: 4CV.10.8

Presence and Persistence of Viral Bioindicators in Waste Treatment Sludges Pre and Post Anaerobic Digestion.
Presenter portrait

Erika SINISGALLI

CRPA, Environment & Energy Dpt., ITALY

Session reference: 4CV.10.9

Corn Crop Residues: Chemical Characterization and Biomethane Potential
Presenter portrait

Yingmu CHANG

DBFZ, GERMANY

Session reference: 4CV.10.12

Value Creation of Biogas in China
Presenter portrait

Francis Robert Demetri C. QUINGCO

Silliman University / Southeast Asian Regional Center for Graduate Study and Research in Agriculture, PHILIPPINES

Session reference: 4CV.10.14

Design of Biogas Equipment Using Filter Cake with and without Cow Dung Additives as Input
Presenter portrait

Lukas KRATKY

Czech Technical University in Prague, Process Engineering Dpt., CZECH REPUBLIC

Session reference: 4CV.10.15

Identifying Process Efficiency of Biogas Upgrade to Biomethane by Hollow Fibre Membrane
Presenter portrait

Uwe BEHMEL

HAW Landshut, GERMANY

Session reference: 4CV.10.16

Biological Repowering of Biogas Digesters
Presenter portrait

Maria J SAN JOSE

University of the Basque Country, Chemical Engineering Dpt., SPAIN

Session reference: 4CV.10.18

Valorization of Olive Grove and Olive Industry Wastes in a Conical Spouted Bed

Biogas Developments and innovative solutions

Session Description

This oral session covers the diversity of the application of biogas technologies in reducing greenhouse gas emissions, the treatment of lignocellulosic biomass, use in the pig rearing sector and also includes an assessment of the biogas potential from organic waste in Africa.

Chair & Moderator

Moderator portrait

Bernhard DROSG

BEST - Bioenergy and Sustainable Technologies, AUSTRIA

Moderator portrait

Kurt HJORT-GREGERSEN

Danish Technological Institute, Environment Technology Dpt., DENMARK

Presenters

Presenter portrait

Gert HOFSTEDE

Hanze University of Applied Sciences, iLST Dpt., THE NETHERLANDS

Session reference: 4DO.1.2

A Biological Process for Converting Lignocellulosic Grass into Volatile Fatty Acids: The Cow as Inspiration
Presenter portrait

Brandon GILROYED

University of Guelph Ridgetown Campus, School of Environmental Sciences, CANADA

Session reference: 4DO.1.3

Potential for Incorporation of Swine Mortality Alkaline Hydrolysate Into Anaerobic Digestion
Presenter portrait

Hans LANGEVELD

Biomass Research, THE NETHERLANDS

Session reference: 4DO.1.4

Biogas Potential from Organic Waste In Africa

Innovative Biogas applications

Session Description

This biogas oral session focuses on innovations in biogas technology, its application in the treatment of a wide variety of feedstocks and the refinement of raw biogas for innovative conversion to energy.

Chair & Moderator

Moderator portrait

Tanmay CHATURVEDI

Aalborg University, Chemical Engineering Dpt., DENMARK

Moderator portrait

Katja OEHMICHEN

DBFZ-German Biomass Research Centre, Bioenergy Systems Dpt., GERMANY

Presenters

Presenter portrait

Claudio CARBONE

ENEA, Energy Technologies and Renewables, ITALY

Session reference: 4DO.4.1

Innovative Biomethane Pathways: The BIOMETHAVERSE Project
Presenter portrait

Jaroslaw MILEWSKI

Warsaw University of Technology, Institute of Heat Engineering, POLAND

Session reference: 4DO.4.3

Experimental Investigation of Dairy Biogas as Fuel for a Molten Carbonate Fuel Cell
Presenter portrait

Rjaa Jawad ASHRAF

Coventry University, Centre for Computational Science and Mathematical Modelling, UNITED KINGDOM

Session reference: 4DO.4.4

Mathematical Optimisation of a Case Study Wastewater Anaerobic Digestion System using ADM1 Coupled with the Transformer Tool

Biogas innovations and research

Session Description

This biogas oral session extends a look at the developments in the use of technologies for innovative applications, including evaluation of AD date for use in artifical intelligence, desulpherisation for power-to-gas, utilisation of biomass syngas and in-situ biogas enrichment.

Chair & Moderator

Moderator portrait

Ioana IONEL

Politehnica University of Timisoara, Mechanical Engineering Dpt., ROMANIA

Moderator portrait

Claudio CARBONE

ENEA, Energy Technologies and Renewables, ITALY

Presenters

Presenter portrait

Ciro VASMARA

CREA Research Centre for Agriculture and Environment, ITALY

Session reference: 4DO.7.1

Multi-feedstock Anaerobic Digestion to Enhance 2nd Generation Methane Production
Presenter portrait

Sebastian BORGQUIST

DTU Chemical Engineering, Chemical Engineering Dpt., DENMARK

Session reference: 4DO.7.2

Pilot Experiments for a New PtX Gas Desulphurization Technology
Presenter portrait

Lu FENG

NIBIO - Norsk Institutt for Bioøkonomi, NORWAY

Session reference: 4DO.7.3

Bioaugmentation of Enriched Hydrogenotrophic Methanogens into Trickle Bed Reactors for H2/CO2 Conversion

Densification, torrefaction and other innovative pretreatments: experimental studies at different scales and numerical modelling

Session Description

This is a poster session focussed on biomass pretreatments, pelleting and briquetting methods for densification, properties of densified biomass, the effects of contaminants on subsequent conversion processes and pretreatment approaches for flexible feedstock applications.

Chair & Moderator

Moderator portrait

Capucine DUPONT

The Delft Institute for Water Education, THE NETHERLANDS

Moderator portrait

Bernd WITTGENS

SINTEF Industry, Process Technology Dpt., NORWAY

Presenters

Presenter portrait

Alberto ASSIRELLI

CREA - Research Center for Engineering & Agro-Food Processing, ITALY

Session reference: 4DV.6.2

Effects of the Length of Pellet on Combustion Efficiency in a Domestic Thermal System
Presenter portrait

Alberto ASSIRELLI

CREA - Research Center for Engineering & Agro-Food Processing, ITALY

Session reference: 4DV.6.3

Effects of Geometrical Parameters of Wood Pellet on Mass Flow Rate in a Hopper-auger Prototypal Analytic Instrument
Presenter portrait

Seongil KIM

Korea Institute of Industrial Technology, REPUBLIC OF KOREA

Session reference: 4DV.6.6

Experimental Study on the Grindability Analysis of Torrefied Biomass
Presenter portrait

Carla FUENTES BOIX

Forest Science and Technology Centre of Catalonia, Forest Chemistry, Bioproducts and Human Health DPT., SPAIN

Session reference: 4DV.6.7

Wood Biomass as Biofuel: Improving Thermal Properties Through Low-temperature Torrefaction
Presenter portrait

Elie LACOMBE

French Alternative Energies and Atomic Energy Commission (CEA) SCPC, Reactor and Process Lab, LITEN, CEA Dpt., FRANCE

Session reference: 4DV.6.9

Torrefaction of Oak And Olive Stones in a Semi-industrial Hearth Furnace: Reactor Modelling and Experimental Validation
Presenter portrait

Heather WRAY

TNO, Biobased and Circular Technologies Dpt., THE NETHERLANDS

Session reference: 4DV.6.10

Pre-treatment of Metal-contaminated Biomass for Downstream Conversion to Biofuels
Presenter portrait

Zahra KAZEMI-MEHRABADI

Polytechnique Montreal, CANADA

Session reference: 4DV.6.13

Biomass Pre-processing Technology for Flexible Feedstocks
Presenter portrait

Luis Saúl ESTEBAN PASCUAL

CIEMAT-CEDER, Renewable Energy Dpt., SPAIN

Session reference: 4DV.6.16

Fuel Properties and Combustion Behaviour of Olive Tree and Vineyard Pruning Biomass
Presenter portrait

Regan CEASER

Universidad Rovira i Virgili, Chemical Engineering Dpt., SPAIN

Session reference: 4DV.6.18

Cellulose Production at High Solids Loading from Mixed Softwood by a Microwave-Assisted Deep Eutectic Solvent Pretreatment
Presenter portrait

Carlos ARCE

Czech Technical University, Process Engineering Dpt., CZECH REPUBLIC

Session reference: 4DV.6.19

The Effect of Process Variables on Particle Size and Energy Characteristics for Ball Milling of Beech Chips
Presenter portrait

Ye-Eun LEE

Korea Institute of Civil engineering and building Technology, Land, Water and Environment Research Dpt., REPUBLIC OF KOREA

Session reference: 4DV.6.20

Comparative Study of Food Waste Biochar Post-Treatment Methods for Solid Fuel Usage.
Presenter portrait

Mirjam HAVEKOST

Technical University Mittelhessen, GERMANY

Session reference: 4DV.6.22

Study on the Influence of Fuel Mixture and CaCO3 on Ash Melting behavior of Horse Manure